Lock Chassis:
Cold rolled steel with zinc dichromate finish for corrosion
resistance. Requires standard
2-1/8" (53.97 mm) bore through door.
Backset:
2-3/8" (60.32 mm) standard. 2-3/4" (69.85 mm), 3-3/4" (95.25 mm)
and 5" (127 mm)
available.
Door Thickness:
1-3/8" (34.92 mm) to 1-3/4" (44.45 mm) Latch–Brass with 1/2"
(12.7 mm) throw. Latch housing is steel, with zinc dichromate
finish for corrosion resistance.
7/8" (22.225 mm) bore in edge of door is required.
Latch Front:
Brass or bronze. Standard faceplate for 2-3/8" (60.32 mm)
backset measures 2-1/4" (57.15 mm) x 1" (25.40 mm), with a flat
front, for 2-3/4" (69.85 mm) standard faceplate measures 2-1/4"
(57.15 mm) x 1-1/8" (28.57 mm), with a beveled front 1/8" (3.17
mm) in 2" (50.8 mm).
|
Strike:
Brass, bronze or stainless steel. Standard “T” strike measures
2-3/4" (69.85 mm) x 1-1/8" (28.57 mm). Optional ANSI A115.1
strike measures 4-7/8" (123.82 mm) x 1-1/4" (31.75 mm). All
strikes have a 1-1/4" (31.75 mm) lip to center dimension.
Handing: Non-handed.
Finish:
US3, US4, US5A, US10, US10B, US26, US26D.
Certification & Compliance:
• ANSI/BHMA A125.2, Series 4000, Grade 2
• Underwriters Laboratories (UL and CUL) listed for use on 3
hour, A label single swinging doors.
• Federal Specifications FF-H-106C, Series 160 |
