Lock Chassis:
Cold rolled steel with zinc dichromate finish for corrosion
resistance. Requires standard
2-1/8" (53.97 mm) bore through door.
Backset:
2-3/4" (69.85 mm) backset standard; 2-3/8" (60.32 mm) available.
Door Thickness:
1-3/8" (34.92 mm) to 1-3/4" (44.45 mm) standard.
Latch:
Brass or bronze with 1/2" (12.7 mm) throw. Latch housing is
steel, zinc dichromate finish for corrosion resistance.
Latch front:
Brass, bronze. 2-1/4" (57.15 mm) x 1-1/8" (28.57 mm), beveled UL
latches are standard. Available with 1" (25.40 mm) flat fronts
for 2-3/8" (60.32 mm) backset, or 1" (25.40 mm) beveled fronts
for 2-3/4" (69.85 mm) backset.
Strike:
Brass, bronze or stainless steel. #300 and #306 strikes measure
1-1/4" (31.75 mm) lip to center. #302 and #303 strikes measure
1-3/16" (30.16 mm) lip to center. Strike boxes are available. |
Handing: Non handed.
Cylinder, Standard:
Solid brass, 6 pin cylinder with Arrow “A” keyway standard;
pinned 5 for stock.
Finish:
US3, US4, US10, US10B, US26, US26D.
Consult factory for availability of other finishes.
Certification & Compliance:
• ANSI/BHMA A156.2, Series 4000, Grade 2
• Underwriters Laboratories (UL and CUL) listed for use on 3
hour, A label doors.
• ANSI A117.1 Accessibility Code
• California State Reference Code–for levers returning to within
1/2" (12.7mm) of door surface. |