Lock Chassis:
Stainless steel construction for corrosion resistance. Requires
standard 2-1/8" (53.97 mm) bore through door.
Backset:
2-3/4" (69.85 mm)
Door Thickness:
1-3/8" (34.925 mm) to 2" (50.80 mm).
Latch:
Brass with 1/2" (12.7 mm) throw. Latch housing is stainless
steel and requires a 1" (25.40 mm) bore in the edge of the door.
Latch Front:
Stainless steel, 2-1/4" (57.15 mm) x 1-1/8" (28.57 mm), or
2-1/4" (57.15 mm) x 1-1/8" (28.57 mm) full radius. Available
with either flat or beveled fronts.
Strike:
Stainless steel. Standard marine strike measures 2-3/4" (69.85
mm) x 1-1/8" (28.57 mm) and has full radius with 7/8" (22.225
mm) lip to center dimension. Available with ANSI A115.2 strike
measuring 4-7/8" (123.95 mm) x 1-1/4" (31.75 mm) lip to center
dimension.
Handing: Reversible. |
Cylinder, Standard:
Solid brass, 6 pin cylinder with standard Arrow “A” keyway. Can
be masterkeyed, grandmaster keyed and construction masterkeyed.
Supplied with two 6 pin nickel silver keys.
Cylinder Options:
Interchangeable core–lockset prepared for 6 or 7 pin
interchangeable cores. Supplied less core, but packed with 6 and
7 pin tailpieces. Will accept cores as manufactured by Best™,
Falcon™ and other similar style cores. Suffix “IC” to design.
High Security:
For cylinders meeting UL437 for pick and drill resistance, ASSA
cylinders are available provided there is no existing
contractual system restriction. Consult cylinder section of this
catalog (page 26) for complete range of options.
Finish:
US26, US26D, US32, US32D.
Certification & Compliance
• ANSI/BHMSA A156.2, Series 4000, Grade 1
• Underwriters Laboratories (UL and CUL) listed for use on 3
hour, A label single swinging doors.
• Federal Specifications FF-H-106C, Series 161. |